HYDAC FILTER SYSTEMS GMBH
Setting up / assembly / integration of the filter unit | 5
BeWa MFU-15E_S 4391552d en-us print
51 / 120
5 Setting up / assembly / integration of the filter unit
Observe the following notices for mounting the filter unit.
NOTICE
There is a risk of the unit tipping or slipping away due to vibra-
tions
The filter unit will be damaged.
u
Before starting it up, place the filter unit on a stable, hori-
zontal surface.
5.1 Increasing the stability/adjusting the feet
In order to save space during transport, the filter unit is deliv-
ered with the feet parallel to each other. The stability is re-
duced through this. In order to increase the stability, adjust and
lock the feet to 22° (2 x 22 = 44°) each to the outside. To ad-
just both feet is given on the following pages.
1x Allen wrench
= 2 mm
By adjusting the feet, you increase the stability and change
the dimensions.
1
2
3
4
5
6
7
8
9
A
Summary of Contents for MFU-15E
Page 119: ......
Page 120: ...www hydac com ...
