Safety information
MCS1xxx /-T005
en(us)
Page 8 /
68
BeWa MCS1xxx-T005 4668567a en-us 2022-06-14.docx
2022-06-14
Any residual hazards are indicated by general safety information and
instructions and are described in the operating instructions.
Observe all safety and warning instructions attached to the unit. They must
always be complete and legible.
Do not operate the unit unless all the safety devices are present.
Secure the hazardous areas which may arise between the unit and other
equipment.
Maintain the unit inspection intervals prescribed by law.
Document the results in an inspection certificate and keep it until the next
inspection.
Warning signs used
These signs are listed for all general safety information and instructions in
these operating instructions which indicate particular dangers to persons,
property or the environment.
Danger point warning
Warning about dangerous electrical voltage
Others symbols used
The following symbols found you in this operation instructions.
Tip for handling the product
Required tools
