Measuring menu
MCS1xxx /-T005
en(us)
Page 50 /
68
BeWa MCS1xxx-T005 4668567a en-us 2022-06-14.docx
2022-06-14
Measuring menu
DSPLAY - Show measured variable
Function:
Select the measured variable that is displayed after
switching the unit on and after voltage has returned.
The measured variables FE A to NFE F show a
summation of the particles in the corresponding
category. The counter starts when voltage is
switched on and is reset by the absence of voltage.
The counter readings are stored in the internal
memory after the passage of S.TIME in each case.
The parameter CYC (cycle) gives the number of
particles per variable that were counted within the
current measurement time (parameter S.TIME).
The measuring time begins when the voltage is
switched on or the power-up menu is exited. The
value of the current interval is always displayed.
Parameter:
FE A:
ferromagnetic
particles (Fe)
Class A
FE B:
ferromagnetic
particles (Fe)
Class B
FE C:
ferromagnetic
particles (Fe)
Class C
NFE D:
non-ferromagnetic
particles (nFe)
Class D
NFE E:
non-ferromagnetic
particles (nFe)
Class E
NFE F:
non-ferromagnetic
particles (nFe)
Class F
CYC A:
ferromagnetic
particles (Fe)
Class A
CYC B:
ferromagnetic
particles (Fe)
Class B
CYC C:
ferromagnetic
particles (Fe)
Class C
CYC D:
non-ferromagnetic
particles (nFe)
Class D
CYC E:
non-ferromagnetic
particles (nFe)
Class E
CYC F:
non-ferromagnetic
particles (nFe)
Class F
