FluidAqua Mobil - FAM 10
Troubleshooting
HYDAC FILTER SYSTEMS GMBH
en(us)
Page 53 / 72
BEWA FAM10 3549460a en-us 2011-05-05.doc
2011-05-05
FCU plug missing (only in conjunction with accessory FCU)
Step
Description
1. Fault:
"FCU plug missing"
2.
Cause: Connection cable to the FluidControl Unit FCU is not
connected.
3.
Establish the connection with a connection cable
4.
To reset the failure, press the RESET key
5.
Fault appears again?
->a. Yes
-> proceed to Step 7.
6.
->b. No
-> go to step 10.
7.
Check connection cable and plug; replace if necessary
8.
Fault appears again?
->a. Yes
-> proceed to Step 4.
9.
->b. No
-> go to step 10.
10.
The failure is repaired.