Maintenance
FAM 5
en-US
Page 123 / 148
BEWA FAM5 4166129a en-us 2019-03-04.docx
2019-03-04
Replacing the filter element on the fluid filter
Allen wrench
= 6 mm
If the signal lamp "Change fluid filter" lights up, replace the filter element as
described in the following:
1.
Switch off the unit at the main switch and close
the shut-off valve at the inlet and outlet to
prevent the oil from flowing back from the tank.
Make sure that the unit cannot be inadvertently
switched back on during maintenance work.
2.
Place a suitable container (1) to collect the catch
the operating medium.
Depressurize the filter housing.
Carefully open the drain plug (2) on the filter bowl
and drain the filter housing completely using the
drain plug
= 6 mm on the floor of the filter
housing.
The volume is approx. 2 liters.
After draining, replace the drain plug on the filter
bowl.
3.
Release the tensioning clamp (1) on the filter housing
and remove it downwards (2).
Use an Allen key
= 6 mm (1).
Summary of Contents for FAM 5 FluidAqua Mobil
Page 147: ......
