FluidMonitoring Module High
Pressure
Storage
HYDAC Filter Systems GmbH
en
Page 12 / 28
BeWa FMMHP 3386918a en 2009-06-08.doc
2009-06-08
Check any screwed fittings which have been removed to see that they have been
properly secured.
Always check the product to see that it functions properly when performing
maintenance and servicing work.
Modifications to the FMMHP
Do not make any modifications (design modifications, extensions) to the FMMHP
without the prior consent of the manufacturer.
Any modifications require written permission from HYDAC Filter Systems GmbH.
Immediately replace any machine components which are not in perfect condition.
Use only original spare parts.
Storage
Store the FMMHP in a clean, dry place, in the original packing if possible. Do not
remove the packing until you are ready to install the unit.
Drain the FMMHP completely before putting it into storage. If necessary, rinse the
FMMHP with n-heptane to prevent it from gumming up.
Use and dispose of used cleaning agents and flushing oils properly.
