HYDAC FILTER SYSTEMS GMBH
Setting up / assembly / integration of the filter unit | 5
MoWa OF5 S_N 3160336d en-us lq
39 / 84
5 Setting up / assembly / integration of the filter unit
Observe the following notices for mounting the filter unit.
– Place the filter unit horizontally on a stable, even and hori-
zontal surface.
– Press the brakes on the rollers, if available.
– Make sure that there is sufficient space above the filter
housing to replace the filter elements.
– Observe the maximum permissible ambient temperature
and constant supply of cooling air to avoid overheating.
– Make sure that there is sufficient space above the filter
housing to replace the filter elements.
– Install the shut-off valves in the flow pipe and return pipe
during assembly under the fluid level.
– Fasten the filter unit to the ground with four screws.
