Performing Maintenance
LVU-CD-10
en(us)
Page 48 / 68
BeWa LVU-CD-10 StdPrm 3993633a en-us 2015-08-26.doc
2015-08-26
Proceed as follows:
1.
Switch off the unit at the main switch and allow the motor-pump group
to cool down.
2.
Remove the four screws and the cover of the inspection opening (5.2).
3.
Using a lamp for illumination, check for oil or diesel.
Use a finger to feel for oil or diesel.
a -> If the pump is dry
-> proceed to Step 5.
b -> If the pump is wet / moist due
to oil or diesel
-> proceed to Step 4.
4.
Shut down the unit and contact HYDAC.
5.
Screw the cover tightly with the four screws.
6.
The test has been successfully completed.
Summary of Contents for LVU-CD-10
Page 67: ......
