Unit setup/connection
LVU-CD-10
en(us)
Page 35 / 68
BeWa LVU-CD-10 StdPrm 3993633a en-us 2015-08-26.doc
2015-08-26
Connecting the remote control line
The unit has a connection for a remote control line. You can use this to start
or stop the unit from a control centre.
Unscrew both screws to the cover (615) for connection. Remove the cover
(615). The description of the connection clamps can be found on the rear.
Use a free screw type conduit fitting on the lower side to connect the control
line. The line diameter must be at least 0.5 mm.
Connect the control line on clamp X3 "Remote Start/Stop", "+" and "4". Use
an isolated push-button as an impulse generator. Use the push-button to
start the unit from stand-by or to stop the unit during operation.
Summary of Contents for LVU-CD-10
Page 67: ......
