Replacing the Logo! of the TDE module
FAM 5
en-US
Page 6 / 12
MOWA LogoTDE 4359963 en 2018-05-23.docx
2018-05-08
Preparing the Logo! of the TDE module for assembly
Check the module for transport damage. The module may only be installed
and operated in perfect technical condition, in compliance with this
document.
If no sealing cord has been glued in place in groove (A) on the rear side of
the module's front panel, insert the sealing cord provided in groove (A) and
cut the sealing cord to length so that the joint closes with a tight seal.
NOTICE
Leaks at the Logo! of the TDE module
Moisture/water enters into the E-Box via the Logo! of the TDE module
►
Ensure that the sealing cord is inserted cleanly. If the inserted sealing
cord is twisted or if the joint is not adequately closed, leakage can
occur.
►
Cut the sealing cord to length and insert it such that the joint closes
with a tight seal.
