Determining the configuration of the FAM
FAM 5
en-US
Page 10 / 12
MOWA LogoTDE 4359963 en 2018-05-23.docx
2018-05-08
Determining the configuration of the FAM
In order to adapt the Logo! of the TDE replacement module to your FAM, you
require the model version given in the model code. In order to decode this,
use the following table.
Adapt the configuration of the replacement module according to the model
version. The guidelines for this are the chapters "Configuration menu,
Changing the configuration, Exiting the configuration menu" in the Operating
and Maintenance Instructions for the FAM.
Model code
FAM - X - X - X - X - X - X - H - X - Z - X / X
Product
FAM
= FluidAqua Mobil
Filter Size
…
Operating fluid
…
Mechanical type
…
Voltage/frequency/power supply
…
Filter size fluid filter
…
Vacuum pump
…
Heater
Z
= No heater
H
= Heater (for 200 … 359 V = 1 kW, for
360 … 690 V = 2.4 kW)
Control concept
…
Instrumentation
Z
= Without
A
= AquaSensor (AS)
AC
= AquaSensor (AS)+ContaminationSensor
(CS)
ACS
= AquaSensor (AS) + ContaminationSensor (CS)+
SensorMonitoring Unit (for displaying and saving the
measured values)
Modification number
…
Supplementary details
…
