HYDAC FILTER SYSTEMS Filtromat OF5 F Operating And Maintenance Instructions Manual Download Page 37

Page: 37 / 84

HYDAC FILTER SYSTEMS GMBH

Transporting/storing the filter unit | 5

BeWa OF5F-OF5L 3160337i en-us

37 / 84

5 Transporting/storing the filter unit

Fully empty the filter unit before transporting it or putting it into
storage. Remove the used filter element and dispose of it in an
environmentally friendly manner. Clean the inside of the filter
housing.

NOTICE

Improper clamping of the filter unit

The filter unit will be damaged.

Clamp the filter unit while transporting only via the filter
housing.

Transport the filter unit only in standing position.

Fig. 11:

Transporting the OF5 F/L

Store the filter unit in a standing position in clean and dry
rooms. The conditions required for storage are given in chapter
Technical data.

Summary of Contents for Filtromat OF5 F





















































































Search results

Summary of Contents for Filtromat OF5 F

Reviews:

Related manuals for Filtromat OF5 F

Brands by name

Popular brands

HYDAC FILTER SYSTEMS Filtromat OF5 F, Operating And Maintenance Instructions Manual

Search results

Summary of Contents for Filtromat OF5 F

Reviews:

Related manuals for Filtromat OF5 F

Brands by name

Popular brands