HYDAC FILTER SYSTEMS FCU1315, Operating And Maintenance Instructions Manual

Page: 134 / 185

8 | Performing HYDAC FILTER SYSTEMS
122 / BeWa FCU1315 4168086b
8.4. High-pressure adapter maintenance
Check or clean the strainer and the flow control valve in the
high-pressure adapter
at regular intervals.
If the required flow through the FCU is not achieved, check
and clean the strainer and the flow control valve in accordance
with the following chapters.
Fig. 53: High-pressure adapter
1. Cleaning/changing the strainer
Clean this strainer (B) in the high-pressure adapter at least ev-
ery six months, or more frequently if heavy soiling makes it
necessary.
Fig. 54: Cleaning / changing the strainer in the high pressure adapter
2x Wrench = 22 mm
1x screwdriver 9x1 mm
or special tool (see chapter Finding
accessories
[
}
141]
)
A
Test point