HYDAC FILTER SYSTEMS GMBH
Inserting the SD card | 5
BA FAM5 replace adjust the control and display 4639760 en-us web
15 / 20
5 Inserting the SD card
To insert the micro SD memory card, proceed as follows:
1x screwdriver
3 x 150
ü
Switch the unit off and disconnect the main switch. Se-
cure the unit against being switched on again.
ü
Check that the switch cabinet is not live.
1.
Open the SD card socket by carefully inserting the blade
of the screwdriver
= 3x150 into the groove on the
front of the card socket and pull it partially out of the
card slot with a lever movement.
2.
Pull the card holder into the position shown in the figure.
Do not pull the SD card socket completely out of the SD
card slot.
3.
Insert the micro SD card into the card socket.
Make sure the micro SD memory card is oriented cor-
rectly in the card socket (see photo).
4.
Insert the micro SD card until you hear it click into place.
If the SD card socket does not slide in smoothly, do not use
force to push it in. Pull the card out, adjust the orientation, and
push it in again. The correct orientation is shown in the follow-
ing figure.
5.
Push the card holder into the card slot until it clicks into
place.
1
2
3
4
5
6
Summary of Contents for FAM 5
Page 20: ...www hydac com ...
