HYDAC FILTER SYSTEMS CTU 1x3x Series Operating And Maintenance Instructions Manual Download Page 38

Page: 38 / 92

Operating the filter membrane holder

Version with a clip

NOTICE

Operation without an intermediate ring / supporting sieve

Leak in the filter membrane holder

►

The membrane holder only seals effectively when:

- a vacuum is applied

- a supporting sieve is inserted with a filter membrane

►

It is not possible to use two intermediate rings.

Squeeze the clip together by the handles (1). Push the clip over the filter

membrane holder (2). Carefully release the clip handles—the clip’s spring

force (3) will press the two halves together with the intermediate ring of the

filter membrane holder.
Make sure that an intermediate ring and two supporting sieves are used

when a clip is used.

CTU 1x3x Series

en(us)

Page 38 / 92

BeWa CTU1x3x 3631694d en-us 2017-03-13.docx

2017-03-13

Summary of Contents for CTU 1x3x Series





























































































Search results

Summary of Contents for CTU 1x3x Series

Reviews:

Related manuals for CTU 1x3x Series

Brands by name

Popular brands

HYDAC FILTER SYSTEMS CTU 1x3x Series, Operating And Maintenance Instructions Manual

Search results

Summary of Contents for CTU 1x3x Series

Reviews:

Related manuals for CTU 1x3x Series

Brands by name

Popular brands