6
HPT
500
IO-Link
Edition: 2020-04-08
HYDAC ELECTRONIC GMBH
Part no.: 670038
The symbol means that appropriate ESD-protective measures must be
considered according to DIN EN 100 015-1.
(Cause of a potential equalisation between body and device-mass as
well as the housing-mass about a high-impedance resistance (approx. 1
MOhm) e.g. with a commercial ESD wrist strap).
4.2 Intended use / foreseeable misuse
Claims for defects or liability, regardless of the legal foundation, do not apply with incorrect
or improper installation, commissioning, usage, handling, storage, maintenance, repair, use
of unsuitable components or other circumstances, which the manufacturer is not responsible
for.
The manufacturer assumes no responsibility for determining the interfaces for installation in
a system or the installation, use or functionality of the product in this system.
4.3 Obligation of the operator before start-up
In accordance with the EC Machinery Directive, the measuring system of a component is
considered to be a machine part for the installation into a system/machine. Moreover, the
conformity of the measuring system was investigated in respect of the EMC Directive.
It is therefore only permitted to start up the measuring system if it has been established that
the system/machine into which the measuring system is to be fitted, satisfies the provisions
of the EC Machinery Directive, the EC EMC Directive, the harmonized standards, European
standards or the corresponding national standards.
4.4 Personnel selection and qualification; fundamental obligations
All work on the measuring system must be carried out by qualified personnel only.
Qualified personnel includes persons, who, through their training, experience and
instruction, as well as their knowledge of the relevant standards, provisions, accident
prevention regulations and operating conditions, were authorized by the persons
responsible for the system to carry out the required work and are able to recognize and
avoid potential hazards.
The definition of “Qualified Personnel” also includes an understanding of the standards
VDE 0105-100 and IEC 364 (source: e.g. Beuth Verlag GmbH, VDE-Verlag GmbH).
Clear rules of responsibilities for the assembly, installation, start-up and operation to be
defined. It is obligatory to provide supervision for trainee personnel!
4.5 Organisational
measures
The user manual must always be kept accessible at the place of use of the measuring
system.
In addition to the user manual, generally applicable legal and other binding accident
prevention and environmental protection regulations must be paid attention to and must
be mediated.
The respective applicable national, local and system-specific provisions and
requirements must be paid attention to and mediated.
It is mandatory for the operator to inform personnel on special operating features and
requirements.
