Hyd-Mech M-16, Operation And Maintenance Manual

Page: 25 / 124

Pg. 2.10
NOTE: The "CT" value is the accumulated total number of parts that have been cut from the JOB number since it was last
reset. The machine will only cut the quantity which is the difference between REQUIRED QUANTITY and CUT
QUANTITY. When REQUIRED QUANTITY equals CUT QUANTITY, the machine AUTO CYCLE will stop and you will
be unable to restart the same job until the "CUT QUANTITY" value has been reset.
NOTE: Before entering "AUTO MODE" and working with a "QUEUE", follow the same procedures as outlined on the
previous page in "AUTOMATIC OPERATION" with regards to setting up for initial trim cut.
W W
W W WORKING WITH A QUEUE
ORKING WITH A QUEUE
ORKING WITH A QUEUE ORKING WITH A QUEUE ORKING WITH A QUEUE
The purpose of a QUEUE is to allow the operator to run several jobs (max of 5) in series if they are of like
material. In AUTO mode, press and the display window will appear as shown.
If you choose to VIEW the QUEUE, press The display window will show the jobs in the current QUEUE.
Two jobs at a time are shown.
Use the CURSOR buttons to view all the jobs. To run the QUEUE as it is displayed, press the CYCLE START button
on the control panel. No editing is possible in the VIEW mode. The screen will now prompt you to start the blade for a trim
cut.
If you choose to Edit the QUEUE, press This will clear any jobs that are in the QUEUE and the display
window will show an empty Queue.
CONTINUED
ENTER
A 4 R 20 L12.250 A 4 R 20 L12.250 A 4 R 20 L12.250 A 4 R 20 L12.250 A 4 R 20 L12.250
B10 R 200 L29.050 B10 R 200 L29.050 B10 R 200 L29.050 B10 R 200 L29.050 B10 R 200 L29.050
First Job
Second Job
Length To Cut Quantity To Cut
QUEUE
REV
QUEUE
REV
A 0 R 000 L00.000 A 0 R 000 L00.000
A 0 R 000 L00.000 A 0 R 000 L00.000
A 0 R 000 L00.000
B 0 R 000 L00.000 B 0 R 000 L00.000
B 0 R 000 L00.000 B 0 R 000 L00.000
B 0 R 000 L00.000
ST ST ST ST STAR AR AR AR ART THE BL T THE BL T THE BL T THE BL T THE BLADE ADE ADE ADE ADE
FOR TRIM CUT FOR TRIM CUT
FOR TRIM CUT FOR TRIM CUT FOR TRIM CUT
VIEW Q - QUEUE VIEW Q - QUEUE
VIEW Q - QUEUE VIEW Q - QUEUE
VIEW Q - QUEUE
NEW Q - ENTER NEW Q - ENTER
NEW Q - ENTER NEW Q - ENTER
NEW Q - ENTER