2
Safety Precautions
1.
Always use protective earplugs. The powerpack complies with the EC noise limits,
but by daily long-lasting operation there is a risk of hearing defects.
2.
Always connect hoses before starting.
3.
Always keep the electrical box, cables and sockets clean.
4. In case of non-operation or performance of service, always turn off the motor.
5.
Never start the engine without side covers.
6.
Operation of the powerpack without tool connected and with lever at “ON” may
cause overheating of the system and damage to the powerpack.
7.
When lifting the powerpack from a vehicle, we recommend the use of a crane.
8.
The pressure relief valve is set at 160 bar from our plant. Never set it higher.
9.
Always use filters with by-pass. The use of filters without by-pass may blow the
hydraulic hoses and the filter cover.
Filling Up Hydraulic Oil
•
To fill up with hydraulic oil, loosen the
filter cover on top of the powerpack.
•
Remove the filter element (see photo),
and fill up with oil. When oil is showing
at the bottom of the filter unit, there is
enough oil on the powerpack.
•
Insert the filter element again, mount
the cover and the powerpack is ready
for use.
Please note: When connecting new extension
hoses, it is necessary to fill up with extra 2 litres of
oil. Therefore always top up the powerpack when
connecting new extension hoses.