Electrical
•
The Electrical installation must be carried out by a qualified electrician in accordance
with the current edition of the I.E.E. Wiring Regulations.
•
If the heater is to be connected to the fixed wiring of the property then installation
must include a double pole isolating switch with a break contact distance of at least
3mm following the colour coding below:
Brown: L
Blue: N
3. Operation
The heater can be controlled by the supplied remote control or directly using the buttons
on the front of the unit.
1. To operate the unit first turn the unit ON using
the ON/OFF switch either via the remote control
or directly on the front of the unit.
2. When the unit is first turned on it will run on fan
only operation. In order to select the heat level,
press the ON/OFF button (on the front of the heater)
again to toggle between the available levels. Alternatively
if you are using the remote control the power settings
are assigned to individual buttons. Press the button for
the power level you require.
3. The unit has a run on feature, this allows the user to
select the length of time the heater will operate before
automatically shutting down. Press the timer button
once for every 0.5h period you wish the unit to run
for (maximum 7.5hrs available).
4. When the unit is turned off it will automatically run on
fan only mode for approximately 30 seconds before it
shuts down, this is normal.
4
ON/OFF
1000W
2000W
TIMER
