background image

2

Thank you for purchasing the Hyco Jetstream hand dryer. The JET1600  
is suitable for many public washroom applications including restaurants,
shops and shopping centres, office buildings, pubs, motorway services, 
factories and supermarkets. Please read and understand these instructions
before commencing installation, and leave them with the user when 
installation is complete.

1. Important safety points

•   

The Electrical installation must be carried out by a qualified electrician in accordance 

with the current edition of the I.E.E. Wiring Regulations.

•   

This appliance must be earthed.

•   

Means for electrical disconnection must be incorporated in the fixed wiring in 

accordance with the wiring rules.

•   

Only connect the hand dryer to a single phase supply with a mains voltage as 

specified on the rating plate.

•   

The hand dryer must be fixed out of reach of a person taking a bath or shower.

•   

This appliance can be used by children aged from 8 years and above and persons. 

with reduced physical, sensory or mental capabilities or lack of experience and 

knowledge if they have been given supervision or instruction concerning use 

of the appliance in a safe way and understand the hazards involved. Children 

shall not play with the appliance. Cleaning and user maintenance shall not be 

made by children without supervision.

•   

Do not cover the air inlet or outlet.

Jetstream 1600_Layout 1  23/06/2015  14:20  Page 2

Summary of Contents for Jetstream JET1600













Reviews: