HYCO MOJAVE FROST PROTECTOR
MODEL FW400H
1. INTRODUCTION
Thank you for purchasing the Mojave Frost Protector. The FW400H is a wall
mounted, compact, electric convector heater used for frost protection and to heat
up small areas indoors.
Please read and understand these instructions BEFORE first use.
2. IMPORTANT SAFETY POINTS
DO NOT COVER THE OUTLET AS IT MIGHT CAUSE
OVERHEATING.
ALWAYS KEEP THE OUTLET AND INLET GRILLS CLEAN.
UNPLUG THE UNIT BEFORE CLEANING. CLEAN THE OUTER
PART OF THE UNIT WITH A SOFT, DAMP CLOTH. NEVER USE
ABRASIVES OR SOLVENTS.
NEVER TOUCH THE UNIT WITH WET HANDS.
WHEN THE UNIT IS FIRST SWITCHED ON AFTER A LONG
PERIOD UNUSED, A BURNING SMELL MAY OCCUR DUE TO
DUST GATHERED ON THE ELEMENT.
THE UNIT SHOULD BE MOUNTED INDOORS IN A CLEAN
AND
DRY
ENVIRONMENT.
ENSURE THE UNIT IS OUT OF REACH OF CHILDREN.
DO NOT INSTALL THE HEATER CLOSE TO ANY FLAMMABLE
MATERIALS.
ALWAYS DISCONNECT POWER SUPPLY WHEN NOT IN USE AS
EVEN WITH THE LOWEST THERMOSTAT SETTING, THE UNIT IS
STILL ON.
DO NOT INSTALL IN FRONT OF OR BELOW ANY POWER
OUTLETS OR SWITCHED SOCKETS.
THE UNIT COMES PRE-WIRED WITH A BS1363 UK PLUG.
ALWAYS FIT THIS UNIT WITH A 3 AMP FUSE.
1
