5
Diagram 1
•
The unit can be installed with the inlet and outlet at the top or at the bottom. Ensure
the bracket orientation corresponds with the unit. When installed with the inlet and
outlet at the bottom of the heater the electronic temperature display will rotate
automatically.
•
Mark and drill two holes using the bracket as a template. Use the supplied wall plugs
and screws to attach the bracket to the wall (see Diagram 1).
•
Refit the unit to the bracket to complete mounting.
Cable defaults out of the right hand side when viewed from the front and installed with the inlet/
outlet at the top of the unit. Supplied pre knocked out but can be changed if desired.
