•
Press down on the ribbed area of the cover and move towards the wall.
•
Apply pressure to the rear of the cover until the front lifts.
•
Remove the cover by pulling it forwards.
•
Adjust the screw to the desired setting. Turn anticlockwise for maximum water flow.
Turn clockwise to reduce the water flow.
Adjusting Water Flow Rate
Diagram 4
A flow restrictor is supplied and must be fitted to the outlet/tap attached to this heater.
This is the best way to control the performance of this product and so adjustment of
the flow rate should not be necessary except in areas with notably high incoming water
pressures.
10
