Hybrid HSF12.4, User Manual

Page: 5 / 16

PAGE 3
USER MANUAL - HMH12.4 PROFESSIONAL LED PIXEL BAR
INSTALLATION
The unit should be mounted via its screw holes on the bracket. Always
ensure that the unit is firmly fixed to avoid vibration and slipping while
operating. Always ensure that the structure to which you are attaching the
unit is secure and is able to support a weight of 10 times of the unit’s weight.
Also always use a safety cable that can hold 12 times of the weight of the unit
when installing the fixture. The equipment must be fixed by professionals.
And it must be fixed at a place where is out of the touch of people and has no
one pass by or under it
Note:
1. In 10 seconds, if no button was pressed , the LED display will turn off. Press any button will turn on the
LED display again. The parameter will not change when the LED display is turned on at first.
2. Whenever has any button be pressed, program will save all parameter after 2 seconds,
3. No matter what the program in which mode, once to detect the DMX or SLAVE signal, the program
will jump into DMX or SLAVE mode automatically. Then, if DMX or SLAVE signal was disconnect , the
program will return to the original mode
1.
MENU
2.
UP
3.
DOWN
4.
ENTER
5.
Power input
6.
DMX input
7.
DMX output
8.
Power output
To select the program function
Increase parameter
Reduce parameter
Enter sub menu
Connect to supply mains power
For DMX512 Link, use 3pin XLR cable plug to input DMX Signal
For DMX512 Link, use 3pin XLR cable plug to link the next unit
Connect to supply mains power for the next unit
HOW TO SET THE UNIT
Display and buttons