Hybrid Audio Technologies Legatia-Series, User Manual

Page: 23 / 65

Legatia User’s Manual ©Hybrid Audio Technologies Page 23 of 65
inductance with stroke, frequency and power, and is the primary source of intermodulation distortion
(IMD).
Tinsel Leads
The tinsel leads for the L4 are terminated on one side of the voice coil. The tinsel leads are bonded
directly to the former and brought out to the terminals, which greatly reduces tinsel lead slap and
does not compromise the structural integrity of the cone.
Terminals
The Legatia L4 comes equipped with heavy-duty male slide terminals for both positive and negative
connections. The terminals are gold-plated to optimize contact, and give the end user flexibility in
tinned wire or binding post terminations.
Summary
The Legatia L4 is the ideal multi-purpose super high-end speaker driver. Mechanical and electrical
parameters are amenable to a variety of different installations and speaker locations. This driver is
intended to be used in an infinite baffle configuration; a simple, solid baffle, solidly attached to the
car’s chassis with available airspace at the rear of the baffle is all that is required for optimum
operation. The size of the L4 allows it to be mounted in typical “4-inch” midrange locations within a
vehicle, or in custom locations at the discretion of the end-user, as long as there is adequate airspace
behind the driver to allow it to maintain proper damping and acoustic suspension.
At home in virtually any arrangement, the L4 is Hybrid Audio Technologies Legatia high-end
midrange offering, boasting exceptional performance and a design philosophy that goes hand in hand
with true high-fidelity playback.