L3 Pro Dome
Midrange
Dome
You will find no composite or metal cone
materials used on the L3 Pro, as our approach
to point-sourcing is to allow the Legatia Pro
midrange driver to effectively play into upper treble
frequencies. The Legatia L3 Pro is a dome-type
driver consisting of a proprietary Japanese fine
cotton hybrid diaphragm with extremely low
moving mass. Cotton is widely acknowledged as
the best-damping material for dome midrange
drivers, as it provides the near optimum balance of
strength and weight. The dome has been treated
with a water resistant element to accommodate
door mounting, or other areas prone to occasional
contact with liquid. The dome design offers an
exceptional dispersion pattern to make for flexible
installation and speaker location. The Legatia L3 Pro
has an outstanding extended frequency response;
the usable frequency range of this driver exceeds
seven complete octaves of usable bandwidth
on-axis (250 Hz – 13,000+ Hz). Even off-axis, the L3
Pro faithfully recreates more than five full octaves
of information, for the ultimate “small-format”
midrange/full-range driver.
Suspension
The surround is an extension of the fine Japanese
treated cotton fabric which is highly consistent,
and does not suffer the variance of natural rubbers.
This surround terminates mechanical vibrations
well, having a low stiffness for positive damping of
resonances.
Terminals
The Legatia L3 Pro comes equipped with
heavy-duty nickel-plated spring-loaded push
terminals for both positive and negative. The
terminals optimize contact, and give the end
user flexibility in tinned wire or binding post
terminations
Summary
The Legatia L3 Pro is the world’s finest
multi-purpose super high-end dome midrange
speaker driver. Mechanical and electrical
parameters are amenable to a variety of different
installations and speaker locations. This driver
is intended to be used in a variety of installation
protocols and arrangements. The size of the L3
Pro allows it to be mounted in typical “3-inch” and
“4-inch” midrange locations within a vehicle, or in
custom locations at the discretion of the end-user,
even in areas where there may not be adequate
airspace behind the driver.
At home in virtually any arrangement, the L3
Pro is Hybrid Audio Technologies’ Legatia Pro
high-end small-format midrange offering, boasting
exceptional performance and a design philosophy
that goes hand in hand with true high-fidelity
playback.
Legatia Pro
Speaker
Design
© Hybrid Audio Technologies • Cumming, GA • 770.888.8200
© Hybrid Audio Technologies • Cumming, GA • 770.888.8200
16
17
