background image

Warranty 

 

Hybrid Audio Technologies extends a limited one year warranty to the original purchaser, 

certifying that this product will be free from defects in materials and workmanship under 
normal and proper use for one year from the date of purchase. 

 

Hybrid Audio Technologies’ responsibility under this warranty is limited to replacing or 
repairing, at Hybrid Audio Technologies’ option, products or parts determined by Hybrid Audio 

Technologies to be defective either in materials, or workmanship.  To attain warranty service, 
the customer must deliver the product or the defective part(s), appropriately packed with 

proof of purchase date, to an authorized Hybrid Audio Technologies dealer.  In the event that 
a direct return from a consumer is required, the consumer must obtain from Hybrid Audio 

Technologies a return authorization number, and ship the defective product directly to Hybrid 

Audio Technologies.  All shipping expenses are the customer’s responsibility. If the product 
has been updated or superseded, a replacement will be made with a current model of the 

same quality and function.  Warranty of the replacement parts is limited to 90 days or the 
unexpired portion of the warranty period of the product on which the parts are being used, 

whichever is longer. 

 
This warranty does not cover any defects or costs caused by: (1) modification, alteration, 

repair or service of this product by any persons or company other than Hybrid Audio 
Technologies; (2) physical abuse to, overload of, or misuse of, the product or operation 

thereof in a manner inconsistent with the use indicated in the instructions; (3) any use of the 

product other than that for which it was intended; or (4) shipment of the product to Hybrid 
Audio Technologies for service.  This warranty does not cover labor costs. 

 
Hybrid Audio Technologies is not liable for any special incidental or consequential damages, 

including, but not limited to, personal injury, property damage, damage to or loss of 

equipment, lost of profits or revenue, costs of renting or buying replacements and/or any 
other additional expenses, even if Hybrid Audio Technologies has been informed of the 

prospect of such damages.  Any express warranty not provided herein, and any remedy which 
other than the warranty contained herein might arise by inference or operation of law, is 

hereby excluded and disclaimed including the implied warranties of merchantability and of the 

fitness for a particular purpose.  

 

 

© Hybrid Audio Technologies, 2010 

Page 22 of 23 

 

Summary of Contents for Imagine I61-2
























Reviews: