KEYPHONE OPERATION
8
. In conversation with the 1st. external party.
.Press [HOLD] key to hold the 1st party.
<=
B
.Make the second external call. (Select a CO line.)
.Press [DND/CN] when the 2nd party answers, all three
parties are connected.
When you hang up, the other two parties can not converse with each other unless
you press [DND/CN] key again before hanging up. The other two parties can then
have three minutes for conversation, and either of them can dial a digit (0-9)--
DTMF signal--for three more minutes.
To re-enter the conversation between two external parties:
.Press either CO key of the two CO lines, A Busy tone is heard.
. Press [DND/CN] key.
Conference with 1 internal party and 1 external party:
<=
A
. In conversation with an internal/external call.
. Press [HOLD] key to hold the call.
<=
B
. Make another internal/external call.
. Press [DND/CN] when the 2nd party answers, all three parties are
connected.
1. To return to the first call if the second call is not answered, press the blinking
CO key (external call) or dial the called Ext. No. (intercom) to retrieve held party.
2. When connecting 1 external party and 1 internal party, after one of the three
parties has hung up, the other two parties can still converse with each other.
&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
D.04 Call Transfer
(((((((((((((((((((((((((((((((((((((((
Call Transfer is to send a call from one Extension to another. There are
three types of Transfer: Direct, Indirect, and voice-announced. For
Direct Transfer, the sending Extension transfers the call and hangs up; for
Indirect Transfer, the sending Extension rings a selected Extension and
waits until the call is answered, then transfer the call; for voice-
announced, the sending Extension informs the selected Extension through
Speaker by the paging function.
Description:
Transfer an external call:
/
. Press a programmed DSS key or
6
EXT.No.
press [HOLD] then dial the selected Ext.
number.
. Press [TRF/FL] key directly for Direct Transfer; press [TRF/FL]
after the selected Ext. answers for Indirect Transfer.
1. When a programmed DSS key is pressed, the call automatically goes on
hold and dials the Extension number programmed for the DSS key.
2. Transfer Recall: If the selected Extension is busy, the transferred call will
ring when the Extension is free. If the transferred call is not answered after a
programmed duration, the call will ring back the sending Extension.
3. To transfer the call again or to another party, press the blinking CO key to
retrieve the call and repeat the Call Transfer procedure.
&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
D.05 Answer Call Waiting
(((((((((((((((((((((((((((((((((((((((
As described in B.01 Call Waiting, if you are absent or your Extension
is busy when other Extension uses the Call Waiting feature to wait for
your answer, the LED of your [MW/PT] key flashes slowly.
Description:
Your Extension busy: end/hold the previous call:
.The LED of the [MW/WT] key flashes, informing you someone is
waiting.
/
;
6
6
/
. Terminate the previous call by hanging up/press [SPK] or hold the
previous call and then hang up to wait. The waiting Extension will receive
a Call Waiting Ring when you finish the previous call. Once the waiting
caller answers the Ring, your telephone then rings. If the Handset of the
waiting Extension is off hook, or its Speaker is on, your Extension will
ring after you hang up.
Your Extension is idle when someone leaves a Message
.Press the flashing [MW/PT] key to ring the waiting Extension.
Summary of Contents for B80
Page 1: ... C AUTO TELECOM 2000 ...
