manualshive.com logo in svg

HY Technologies F2R4B, User Manual

Share
Download
HY Technologies F2R4B User Manual Download Page 11

 

 

- 10 -

Customer can paint sensors to match his vehicle color, but please note that sensors painted by 
customer void the warranty on the sensors. 
 
Sensors with any type of glue or silicone applied void the warranty on the sensors. 
 
Items with seal (if any) broken, case (if any) opened, repaired, modified, or disassembled by 
customer void the warranty.     
   

Items for return must be in new, uninstalled, unused, re-sellable condition, including the 
original packaging, manufacturer's containers, documentation, warranty cards, manuals, 
and all accessories.     

   

Re-packing and Re-stocking fee: 

Unopened returns are subject to a 15% re-stocking fee. 
Opened returns are subject to a 25% re-packing and re-stocking fee. 
Returns which are damaged or have parts missing (not caused by shipping process) may be 
subject to a greater re-stocking fee, or charged at their full retail prices and deducted from 
refund amount. 
 
Shipping and Handling fee is not refundable.     
   

Returns are not acceptable if the packaging is not in its original condition or the item has 
been used or installed. 
 

International orders are not returnable.     
 
If a domestic or international shipment is refused by the customer or customs and returned back 
to us, a 15% restocking fee will apply less the shipping cost and any other fees incurred if any to 
the customer. It is the customer's responsibility to make all arrangements with us for refused 
shipments.   
 
You are responsible for the shipping and handling cost to mail the defective parts, returns, 
exchanges, and items for Warranty back to us and for us to ship them to you.     
   
You are responsible for the customs duty, tariff or import tax charged by the customs in your 
country.   
 
 
 
 

  Customer Service and Technical Support   

   

 
For customer service and technical support, visit our Web site as listed below, then click on the 
link Contact Us. 
 
 

  Spare and Replacement Parts 

   

 
To order spare and replacement parts for your system, visit our Web site as listed below, then 
click on the link Replacement Parts. 
 
 
 
 
 

 
 

All Rights Reserved 

 HY Technologies 

 Milpitas 

 California 

 USA 

 

http://parkingsensors.net

 

 

Summary of Contents for F2R4B













Reviews:

No comments

Brands by name

Popular brands

Load more brands