Installation on Mast
Mount the rotator to the lower mast support and
then attach the support to the mast. (See Figure
3) Attach one end of the 5-wire cable to the
rotator unit terminals. the cover and grommet
must be slipped over the cable prior to attaching
it. Secure the 5-wire cable to the mast for strain-
relief. Mast guy wires may be attached to the
rotator's lower mast support. Attach the upper
mast to the rotator unit and secure. Install the
antenna on the upper mast, pointing South. The
feedline rotation loop should allow for complete
CCW rotation.
Route the 5-wire cable to the control unit and
connect as before. Check the operation of the
rotator system as in the pre-installation check
Figure 3 Rotator Mounting with Lower Mast
Support
Figure 4 Mast Mounted
Rotator