Hy-Br id Lif t s
Maintenance & Trouble Shooting Manual
HB-1030/ HB-1430
SUPO 611
REV K
SECTION 6 | TROUBLE SHOOTING FLOWCHARTS
Is down valve stuck
open?
low?
red, fill
" below
ir
Flush valve by simultaneously
pressing up switch at base and down
switch on platform control for 30 sec.
Contact CEI for further
troubleshooting.
Check integrity of electrical
connections, There may be a
loose connection or momentary
short.
Flush down valve by
simultaneously pressing up switch
at base and down switch on
platform control for 30 sec.
There may be foreign matter
lodged.
there a restriction in
hydraulic hose?
Replace pump. May
be worn or defective.
place hydraulic hose.
Is up/down switch
damaged?
Replace rocker switch at
upper or lower control.
etting. With black lad on stripe
witch leads, no reading.
Is enable button
working?
Replace enable button/
contact block at upper
control.
Hy-Brid Troubleshooting Flowchart
Elevating Problems
Revision A: Initial Release
01/14/2010
nections
ce limit
ch
Summary of Contents for HB-1030
