SUPO 647
REV D
Operation & Safety Manual
HB-P4.5 / HB-P5.O
3
FOREWORD
The purpose of this Operations and Safety manual is to provide users with the instructions and
operating procedures essential to properly and safely operate the Custom Equipment Hy-Brid Lift
for its intended purpose, and to position personnel and their necessary tools and materials.
WARNING
DANGER
THE OPERATION AND SAFETY MANUAL MUST BE READ AND UNDERSTOOD PRIOR TO OPERAT-
ING THE MACHINE.
• The user/operator should not accept operating responsibility until the manual has been read and
understood as well as having operated the lift under supervision of an experienced and qualified
operator.
• Because the manufacturer has no direct control over machine application and operation, proper
safety practices are the responsibility of the user and all operating personnel.
ANY MODIFICATION ON THIS MACHINE WITHOUT THE EXPRESS WRITTEN CONSENT OF THE
MANUFACTURER IS PROHIBITED.
Fall protection notice:
The guardrail system around the perimeter of the platform is
the fall protec-
tion system
for push-around elevating work platforms per the EN 280:2001 Standard. It is
prohib-
ited
to use an Aerial Work Platform manufactured by Custom Equipment, Inc. With any portion—or
all—of the guardrails removed. Lanyard anchorage points on this type of equipment are not required
to conform to the applicable standard. However, if anchorage points for lanyard attachments are
required by site authorities or other regulations, the anchorage points on all equipment manufac-
tured by Custom Equipment, Inc. Are recommended to be used for
work positioning restraints
of
personnel only. Lanyard lengths are to be determined by operator/owner to restrict the operator to
the confines within the guardrail system.
USE OF FALL ARREST SYSTEMS ATTACHED TO ANCHORAGE POINTS ON EQUIPMENT MAY
CAUSE MACHINE TO TIP, RESULTING IN SERIOUS INJURY OR DEATH.
WARNING
Lanyard
Attachment
Point
