SNARE-Rim
VOLUME
80
TO SELECT A KIT
- Press kit on the control panel and use the scroll wheel or -
/+ button to select a kit.
Tip
：
While adjusting parameters, you can change
its value by using -/+ buttons or scroll wheel also.
TO EDIT A KIT
- Press EDIT to enter EDIT MODE, where you can assign
different voices and adjust other parameters to make your
own kit. Strike on different part on each pad to select among
triggers, or use DRUM button to switch between drum
instruments.
- Use PAGE DOWN/UP to enter VOICE TYPE menu and
use scroll wheel or -/+ button to choose a voice category.
Choose
“
---
”
for a blank voice.
- Use PAGE DOWN/UP to enter VOICE menu and use scroll
wheel or -/+ button to choose a voice within the selected
category referring to Voice List in <APPENDIX> .
Tip
：
The meaning of shortened voice names: R
stands for Rim shot, X for Cross stick, E for Edge, B for
Bell, C for Close, O for Open, Half for Half Open, P for Pedal
Chick, Sp for Pedal Foot Splash.
- Use PAGE DOWN/UP to enter VOLUME menu to adjust
the volume level for a single trigger.
- Press EXIT to quit the current menu and select a place to
save it using +/- button. You can either save it to a preset kit
or a user kit if you don
’
t want to overwrite the preset kit.
Press ENTER again to confirm or press EXIT to cancel.
TO PLAY A DRUM PATTERN (DEMO SONG)
- Press PATTERN button, use scroll wheel or -/+ button to
select a demo, and use the play and stop buttons to
play a demo. The display shows information about demo.
Voice name
Select or Change
BASIC OPERATION
KIT
120 4/4
Rock
1
Kit No.
Kit name
Time signature
Tempo
SNARE-Rim
VOICE TYPESNARE
Voice category
Part to edit
SNARE-Rim
VOICE Rock R
Save Kits to
Rock
----Save OK ----
--------------------
SONG 120 4/4
01 WalkWithTree
Song Number
Playing status Tempo
■
Song Name
Time Signature
12
