background image

WARNING !

READ THE ENTIRE OPERATOR’S MANUAL BEFORE OPERATING.

CAUSING INJURY OR DEATH.

CHIPS, OIL LEAKS, ETC.  FOLLOW ALL OTHER APPLICABLE SHOP SAFETY PRACTICES.

OPERATOR’S MANUAL

MP14.0000

01OCT13

NEVER PLACE HANDS OR OTHER PARTS OF THE BODY NEAR HYDRAULIC LEAKS.  OIL MAY PENETRATE SKIN

WEAR SAFETY GLASSES WHEN INSPECTING OR SERVICING THE SYSTEM TO PROTECT EYES FROM DIRT, METAL

KEEP PEOPLE AND OBSTRUCTIONS CLEAR OF ROOM OR STEP WHEN OPERATING. ANY OBJECT OBSTRUCTING
ROOM OR STEP MOVEMENT MAY BE CRUSHED CAUSING INJURY OR DEATH AND VEHICLE DAMAGE.

HOW TO OBTAIN WARRANTY SERVICE

THIS IS NOT TO BE INTERPRETED AS A STATEMENT OF WARRANTY

HWH CORPORATION strives to maintain the highest level of

customer satisfaction. Therefore, if you discover a defect or

problem, please do the following:

(563) 724-3396 OR (800) 321-3494. Give your name and

coach was purchased, or the date of system installation,

Notify the dealership where you purchased the 

vehicle or had the leveling system installed. Dealership 
management people are in the best position to resolve 
the problem quickly. If the dealer has difficulty solving
the problem, he should immediately contact the Customer
Service Department, at HWH CORPORATION.

If your dealer cannot or will not solve the problem,

notify the Customer Service Department:
HWH CORPORATION 2096 Moscow Rd. Moscow IA. 52760

address, coach manufacturer and model year, date the 

SECOND:

FIRST: 

authorization of an independent service facility, to be

defective part, either by appointment at the factory or by the

CORPORATION will authorize repair or replacement of the

determine whether or not your claim is valid. If it is, HWH

HWH CORPORATION personnel will contact you to

during business hours (8:00 a.m. till 5:00 p.m. c.s.t.).

description of the problem, and where you can be reached

determined by HWH CORPORATION. All warranty repairs 
must be performed by an independent service facility 
authorized by HWH CORPORATION, or at the 
HWH CORPORATION factory, unless prior written approval 
has been obtained from proper HWH CORPORATION 
personnel.

Summary of Contents for AP43472










Reviews: