Title
Rev.
Page
HMC-060, HMK-060 Release 2
Ver2.0
P.57
7-5) Memory switch
Setting memory switch: Functions are set by internal non-volatile memory.
※
For Setting, please use
utility program for setting memory switch
provided by us.
※
Setting value will not be ereased even after power off, until next change.
memory SW
Value
Remarks
SW1
p
fixed
SW2
0~1200
SW3
132 ~ 4000
SW4
Standard
Code Page
For setting default value, select one of the code
page by country
SW5
Base Font
For setting default value in 2 bite code, select one of
Korean(24x24), Korean(16x16), Japanese(24x24) or
Chinese(24x24).
For setting default value in 1 bite code, select one of
ASCII(12x24) or ASCII(8x16,9x16).
SW6
Reserved
SW7
Reserved
SW8
Reserved
1)SW1 : p(70
16
)
When the cutting (DC3 + “i”) is conducted, the paper cuts from the blackmark to
the value which you set at SW2 as the paper moves forward (plus).
2)SW2 : Set up the distance from the blackmark to the cuttting position.
You can set the value 0~1200(0 ~ 150mm). initial value=1032(129mm)
※
0.125mm / a dot ex) If the value is 100 : 100 x 0.125 = 12.5mm
ex)
SW2 = 100
[
Front side,Printing side
]
1
2
.5
m
m
Black mark Point
Cutting Point
First page
Second Page
※
Blackmark
(Backside)
ABCD
Print direction
