Hwasung HMC-060, Technical Manual

Page: 34 / 61

Title Rev. Page
HMC-060, HMK-060 Release 2 Ver2.0 P.33
FS+’ .’
[Name]
Cancel Korean mode (2Bytes mode)
[Format] ASCII FS .
Hex 1C 2Eh
Decimal 28 46
[Descript] Cancel Korean mode (2Bytes mode)
[Caution] In case of cancel 2 bytes mode in extended graphic mode
Appointment is not required due to auto detection in Korean mode
(Ref.SUB+’x’+n command)
FS+’-’+n
[Name]
Set the underline of Korean
[Format] ASCII FS - n
Hex 1C 2Dh n
Decimal 28 45 n
[Range] 0≤n≤2
[Initial Value] n=0
[Descript]
Set the underline of Korean
n Function
0 Cancel the underline of Korean
1 Set the thickness of underline in 0.125mm
2 Set the thickness of underline in 0.25mm
3 Set the thickness of underline in 0.375mm
4 Set the thickness of underline in 0.5mm
5 Set the thickness of underline in 0.625mm
6 Set the thickness of underline in 0.75mm
7 Set the thickness of underline in 0.875mm
FS+’S’+n1+n2
[Name]
Set the space between Korean characters
[Format] ASCII FS S n1 n2
Hex 1C 53h n1 n2
Decimal 28 83 n1 n2
[Range] 0≤n1≤255, 0≤n2≤255
[Initial Value] n=0
[Descript] Set the space between Korean characters
Set the left space in n1×0.125mm
Set the right space in n2×0.125mm