Poseidon 3262 – starting guide
HW group
Oficjalny dystrybutor:
www.atel.com.pl
45-231 Opole
tel. +48 (77) 455 60 76
ATEL ELECTRONICS
e-mail: [email protected]
ul. Oleska 121
fax. +48 (77) 455 80 56
3) Configuring the Poseidon with a web browser
3.1)
Enter the IP address of the device to the address field in your web browser, or run
UDP Config and click the IP address.
3.2) Main WWW page of Poseidon 3262
•
Current Value – Current reading of the corresponding connected sensor. “–999.9” means
that the sensor is not available or was initialized only after the device was powered up.
•
Alarm Alert – Alarm settings defined for the sensor: whether alarm is activate upon
exceeding the “Safe Range”, destination of alarm alerts.
•
“For more information” – Contact information about the servicing organization. This text
can be changed in “Telnet setup”.
3.3)
Retrieving current readings
•
XML – via the values.xml file. Its format is defined in the XSD file downloadable from the
main page. Detailed explanation of the XML structure is in the manual.
•
SNMP – the poseidon.mib description file can be downloaded from the main page. The
SNMP ports (defaults are 161 and 162) can be changed in Flash setup.
•
Modbus/TCP – structure description is in the manual or in application examples. Standard
port 502 is open for reading.
Device IP address
Unique sensor ID
(serial number)
Sensor safe range
Alert when a reading
is out of safe range
Device name
“Flash setup”
(detailed configuration)
Description of SNMP
MIB and values.XML
structures
“Telnet setup”
(special configuration)
