HWg-STE – manual
HW group
www.HW-group.com
Page 12
Technical specifications
Ethernet
: RJ45 – 10/100 BASE-T
2 sensor inputs:
RJ11 ports for connecting 1-Wire sensors (temperature, humidity...)
"SET" jumper
: configuration jumper to restore factory defaults
Device features
o
Alarms
by e-mail when a threshold is exceeded
o
Remote monitoring
of input states and the temperature sensor
Power supply
o
HWg-STE:
+5V / 250 mA
o
HWg-STE PoE:
+5V / 250 mA (adaptor) or
PoE IEEE 802.3af
(Power over Ethernet)
Dimensions:
65 x 80 x 30 [mm]
LED indicators in the RJ45 connector
o
Green: Power / Status
Rapid flashing: DHCP network configuration in progress
Slow flashing: A sensor is in alarm
o
Orange: Link & Activity
ETHERNET
Interface
RJ45 (10/100BASE-T) – Compatible with 10Mbps and 100Mbps networks
Supported protocols
IP: ARP, TCP/IP (HTTP, SNTP, SMTP), UDP/IP (SNMP)
SNMP compatibility
Ver:1.00 compatible, some parts of the ver 2.0 implemented
SENSORS
Port / connector
S1, S2 / RJ11 (1-Wire Bus)
Type
HWg original accessories
Sensors
Up to 2 sensors in total
Sensors distance
Up to 60m total bus length with one or two sensors
POWER input
Power supply
POWER 5V / 250 mA
Connector
Jack Ø3.5 x 1.35 / 10 [mm]
PoE
(Power over Ethernet)
RJ45 - IEEE 802.3af (for HWg-STE PoE only)
LED Status indicators
POWER / status
Green - power OK (status = DHCP/Local alarm)
LINK & Activity
Yellow - Ethernet connectivity
JUMPER
SET
Load defaults:
Power-on with jumper ON for 15 seconds, switch off and remove jumper
Other parameters
Operating temperature
–10 to +60 °C (+14 to +140 °F)
Dimensions / Weight
65 x 80 x 30 [mm]
/ 500 g
EMC
FCC Part 15, Class B, CE - EN 55022, EN 55024, EN 61000
