HW Group HWg-SH2, Manual

Page: 8 / 13

HWg-SH2
– manual
HW group
www.HW-group.com
First steps
5) Add cabinet to HWg-DCD software

Run HWg-DCD software

Use menu Cabinet > Add new cabinet ,
or press key Ins.

Press Next , select desired device from
list and press Next again. You may
secure your communication optionally.

Enter Name of cabinet.

Set door contacts default states.

Set behavior of Lock input.

Confirm settings and press Finish.
6) Control your locks over HWg-DCD software
Select cabinet
to control
Use buttons to lock
and unlock doors
Door must be enabled to be
controlled via HWg-DCD.
See page
Door Setup in
Product configuration
Select number of controlled doors