HW Group HWg-SH2, Manual

Page: 5 / 13

HWg-SH2
– manual
HW group
www.HW-group.com
First steps
1) Connecting the cables

Connect the unit to the Ethernet (patch cable to a switch, or a cross-over cable to a PC).

Connect swing handles and door contacts.

Plug the power adapter in to a power outlet and connect it to the HWg-SH2 power
connector.

The green Power LED lights up on the top of cover.

If the Ethernet connection works properly, the LINK (yellow) LED lights up after a short
while, and then flashes whenever data transfer takes place (activity indication).

After power up, the LINK LED flashes rapidly to indicate IP address negotiation over DHCP.
2) Configuring the IP address
– UDP Config
UDP Config utility
– see root directory
of the supplied CD (Windows and
Linux versions).
Alternatively download from
www.HW-
group.com
Software > UDP Config.

Click the icon to launch UDP
Config . The program
automatically looks for
connected devices.

To search for devices, click the
Find Devices icon.
The program looks for devices on your
local network. Double-click a MAC
address to open a basic device
configuration dialog.
Configure network parameters

IP address / HTTP port (80 by
default)

Network mask

Gateway IP address for your
network

Device name (optional)
Click the Apply Changes button to
save the settings.