19
MEM
symbol would flashs display.
*
As indicated in Figure 9, lock the measured resistance 0.016Ω, and save
it as data unit No.1.
*
As indicated in Figure 10, lock the measured current 278mA, and save it
as data unit No.50.And the memory is full now.
*
In the access mode, press
MODE
key to switch to the measurement
mode, then the operation can be done to lock and save data.
*
In the setting state of alarm critical value, it is required to press down
POWER
key or
SET
key for 3 sec to quit from the setting state of alarm critical
value before operating locking and saving function.
*
Switching on after shutdown will not lose the saved data.
*6. Data Access
Press
MODE
key to enter the Access Mode of the stored data, and the
default to display is the data unit No.01 stored, as shown Figure 11. Then
press
SET
key to turn down to browse the saved data. On browsing the last
data unit, it returns to the data unit No.01.If no stored data, as shown in Figure
12.
In the setting state of alarm critical value, it is required to press down
POWER
key or
SET
key for 3 sec to quit from the setting state of alarm critical
value before pressing
MODE
key to switch to the access data mode.
