28
HFR-8000 Operator
’s Manual for Remote Tracing
•
Setup for Barcode Scanner
- Baud rate: 9600 (or what else bps that can be matched with the BPS-BC option
in the Frame Reader)
- Termination code: <CR>, <LF> or <CR><LF>
•
Inputting sequence of Job Number with a barcode scanner
Press a button to execute
frame or pattern- tracing
Tracer beeps and prompts to
scan a barcode
Scan a barcode and it
’ll
display the number for a
second on the screen
Frame-tracing is automatically
started after the job number
input
The job number is transmitted
with the shape data through
the EDGER-1 port
The job number scanned by the barcode reader is recognized by the target device
which is connected to the ‘EDGER-1’ port with the protocol DCS or DCS_Z.
Scanner ready!!
[ ] METAL
Scan job no!
STOP: Cancel
Job no. scanned
> 123456789012
Scanning right
[ AUTO ] METAL
Transmit..Edger1
[ AUTO ] METAL
