HDC-9100 SERVICE MANUAL 11
2.4.
Safety Precaution
This equipment has been developed and tested in conformity with domestic & international safety standards and
regulations, which guarantees the high stability of this product. This guarantees a very high degree of safety for this devic e.
The legislator expects us to inform the user expressively about the safety aspects in dealing with the device. The correct
handling of this equipment is imperative for its safe operation. Therefore, please read carefully all instructions before
switching on this device. For more detailed information, please contact our Customer Service Department or one of our
authorized representatives.
.
1. This device must be used with accessory kits which were offered by HUVITZ. If customer want to use accessory kit
from other manufacturer, that accessory kit’s safety must be guaranteed by HUVITZ or manufacturer of accessory
kit.
2. The equipment must be operated only by, or under direct supervision of properly trained and qualified person/s .
3. Modifications of this
equipment may only be carried out by Huvitz’s service technicians or other authorized persons.
4. Customer maintenance of this equipment may only be performed as stated in the User Manual. Any additional
maintenance may only be performed by Huvitz’s service technicians or other authorized persons.
5. The manufacturer is only responsible for effects on safety, reliability, and performance of this equipment when the
following requirements are fulfilled: (1) The electrical installation in the respective room corresponds to the
specifications stated in this manual and (2) This equipment is used, operated and maintained according to this
manual.
6. Only persons who have undergone proper training and instructions are authorized to install, use, operate, and
maintain this equipment.
7. User Manual should be kept in the place where the persons in charge of operation and maintenance can access
easily any time.
8. Please do not pull on any cable. Always hold on to the plug when disconnecting cables.
9. Before every operation, proceed with visual inspection on the equipment exterior to seek any mechanical damage(s)
to ensure the proper functioning.
10. Do not obstruct any ventilation outlet for proper heat dissipation.
11. In case of any presence of smoke, spark or abnormal noise/smell from the machine, please power off immediately
and pull out the plug.
12. The device should neither be kept nor installed in the place with the risk of explosion or near the alcohol, benzene
and other inflammable substance.
