Huvitz Excelon CAB-4000, Service Manual

Page: 40 / 59

Auto Blocker CAB-4000
39
No. Components Removal Method
1 B-Arm-2-BTM-Cover - First, Separate the ‘Blocking Arm Assy’ from the machine.
- After remove four screws that fix [1], separate it from [2].
- Removing ‘Theta Axis PI Sensor’
1. Disconnect [5]’s cable connector from [10].
2. After remove two screws that fix [6], separate it from
[2].
3. After remove two screws that fix [5], separate it from
[6].
4. After separate [5]’s cable Pin from connector, extract
the PI cable from [2].
- Removing ‘Small Arm PI Sensor’
1. Disconnect [7]’s cable connector from [10].
2. After remove two screws that fix [8], separate it from
[3].
3. After remove two screws that fix [7], separate it from
[8].
4. After separate [7]’s cable Pin from connector, extract
the PI cable from [3].
- After remove two screws that fix [9], separate it.
- Disconnect all cable connectors that is linked to [10].
- After remove four screws that fix [10], separate it.
- After remove two screws that fix [11], separate it.
- Assembly is the reverse procedure of disassembly.
2 B-Arm-2
3 B-Arm-1
4 B-Arm-0
5 Theta Axis PI Sensor
6 B-Theta-Sensor-Brk
7 Small Arm PI Sensor
8 B-Arm-2-Sensor-Brk
9 Z Axis PI Sensor
10 PCB Assy (BMI-100)
11 Limit Switch