Huviron SK-V207IR-Z946, User Manual, Page: 31 / 56

31
4.2.4.1 PATTERN SCAN SETTING
1) Pattern Num :
2) Start Pattern Learn :
3) Run Pattern :
Set pattern number.(1~4) Default value is 1.
To move P/T/Z to memorize pattern.
: Memory Left - Display the available number of memory.
Run pattern.
4) Move the joystick to stop the pattern scan, after few seconds the pattern scan again
5) Send the command of pattern Stop or menu key to move out the pattern scan.
Schedule enables you to schedule a sequencing by day and time. Up to 8 timeline
can be selected for a day.
4.2.5 TIME SCHEDULE (Path : MAIN MENU / MOTION CONTROL / TIME SCHEDULE)
Press IRIS OPEN or Menu To Stop
[Menu 4-13] Pattern Scan Set Menu
Memory Left: 000
Chapter 4. Menu configuration and operating
TIME SCHEDULE
-------------------------
[Menu 4-14] Time Schedule Menu
Number: 1
Enable: Off
Master Enable: Current
Start Time: 00:00
End Time: 00:00
Time Act: SEQ1
Set
Back
Exit