Huviron SK-V207IR-Z946, User Manual, Page: 22 / 56

Not only basic function such as Pan/Tilt/Zoom but additional functions are available for this
camera. Additional functions are as follow.
This functions are set on OSD.
: Press "MENU" button to go to the menu(P/T/Z function would be stopped.)
: Move to the sub menu or select the menu.
: Move to the above menu or move the cursor to "EXIT"
Move the cursor to the right or the sub menu.
Move the cursor to the left or the previous menu.
Move the cursor to the above or increase the value.
Move the cursor to the below or decrease the value.
*If you move the joystick when working this function(Pattern, Preset) the function will stop,
after finishing the control, the function will work again.
OSD Menu setup by the specialty controller
1) MENU
2) IRIS OPEN
3) IRIS CLOSE
4) JOY STICK :
ㆍRight :
ㆍLeft :
ㆍUp :
ㆍDown :
Chapter 4. Menu configuration and operating
22
[Table 4-1] Main menu description
1. PRESET
2. MOTION CONTROL
3. TIME SET
4. PRIVACY ZONE
5. ALARM IN
6. ALARM OUT
7. SETUP
8. SYSTEM
9. SCHEDULE
10. STEP OUT INITIAL
System setting such as Password, Reboot, Reset, System Information and
Step Out Init.
Setting function of speed dome such as Sequence/Random Scan,
Custom/CW/CCW Scan and Pattern/Schedule
Setting functions of speed dome such as Preset and Motion detection
Set current time
Hide the points for which area masking is selected from the screen.
Set regarding sensor input
Set operation of the connected sensor
Set up for camera, motor and display
Schedule enables you to schedule a sequencing by day and time.
Compensate the pan position of camera