17
_ 700TVL Pipe Camera
700TVL Pipe Camera _
18
BACKLIGHT
WHITE BAL
Function of adjusting shutter speed and AGC.
ATW :
Select this when the color temperature is between 2,500°K and 9,500°K
AWB :
Select when the color temperature is between 1,800K°~10,500K°
AWC->SET :
To find the optimal luminance level for the current environment, point
the camera towards a sheet of white paper and press the set button. If
the environment changed, readjust it.
MANUAL :
Adjust the proportion for RED and BLUE
Strong/large sources of light coming from behind the main subject
(such as a person indoors that is in front of a window) cause the light
meter to underexpose for the main subject
►Menu Set up
Menu Set up◄
MAIN MENU
1. LENS
2. EXPOSURE
3. BACKLIGHT
4. WHITE BAL
5. DAY&NIGHT
6. SMART 3DNR
7. F-DNR
8. FUNCTION
9. EXIT
MANUAL
OFF
ATW
COLOR
ON
OFF
SAVE
DWDR
1. LOW LEVEL
2. HIGH LEVEL
3. RETURN
1
RET
1
MAIN MENU
1. LENS
2. EXPOSURE
3. BACKLIGHT
4. WHITE BAL
5. DAY&NIGHT
6. SMART 3DNR
7. F-DNR
8. FUNCTION
9. EXIT
MANUAL
OFF
ATW
COLOR
ON
OFF
SAVE
DWDR
1. LOW LEVEL
2. HIGH LEVEL
3. RETURN
1
RET
1
1. OFF :
Deactivates the BACKLIGHT function
2. DWDR :
Rather than expensive double scan CCD, used regular CCD to perform the
WDR.
2-1. LOW LEVEL
(0~15): In WDR mode, AGC in low
2-2. HIGH LEVEL
(0~15) : In WDR mode, AGC in high.
2-3. RETURN
3. BLC :
Back Light Compensation / User controllable mode, shown the subject clear in
anywhere.
3-1. VALUE
(LOW, MIDDLE, HIGH) : Adjust the brightness.
3-2. AREA :
Set up the area of using BLC
a. SINGLE :
Set up the first BLC area. (area & size adjustable)
b. DOUBLE :
Set up the second BLC area. (area & size adjustable)
3-3. DEFAULT :
Reset as default
4. HSBLC :
High Light Compensation / Masking the highlight in the image to distinguish
the subject
4-1. GAIN (0~100) :
The higher GAIN level is, the masking is covered only highlights. The
lower the GAIN level is, the masking is covered on low illuminations.
So, the lower GAIN level is, the more masking areas covered.
4-2. MODE
(ALL DAY, NIGHT ONLY) : Select one
4-3. MASK-LEVEL (0~100) :
Adjust the brightness on the selected area.
4-4. DEFAULT :
Reset as default
4-5. M.SKIP AREA :
Adjust the selected area not to get masked by HSBLC. (area, size,
on, off)
