23
_ 700TVL Pipe Camera
700TVL Pipe Camera _
24
►Menu Set up
Menu Set up◄
FUNCTION
SMART 3DNR (ON/OFF)
3. D-EFFECT : Additional digital function activated.
3-1. D-ZOOM (ON/OFF) : X1~X32 DIGITAL ZOOM can be adjustable.
a. RANGE (X1~X32) : Adjust range of digital zoom
b. PAN : Adjust left and right location on the magnified image
c. TILT : Adjust up and down location on the magnified image
3-2. SMART D-ZOOM (ON/OFF) : When motion detect, zoom in the area.
a. RANGE (X2~X5) : Adjust range of SMART D-ZOOM.
b. POSITION : Adjust the position
c. SENSITIVILITY (0~100) : Select the level of sensitivity of subject
d. TIME (0~15) : Adjust the condition time in order to catch the motion.
3-3. DIS (ON/OFF) : Improve the image stability.
3-4. FREEZE (ON/OFF) : On: To freeze steal image.
Off: Images regularly showing
3-5. MIRROR : Functions of mirror-inverted display of the picture:
(MIRROR: Mirror-inverted display at horizontal axis, V-Flip: Mirror-
inverted display at vertical axis, Rotate: Mirror-inverted display at 180°
axis, Off: No mirror-inverted display)
3-6. NEG. IMAGE (ON/OFF) : Shown the image with complementary colors
4. IMAGE ADJ : Adjust image in the screen.
4-1. SHARPNESS (0~31) : Sharpness of the picture.
4-2. MONITOR : Adjust the settings value of video appropriate to your monitor.
a. CRT : Select when used CRT monitor. Adjust details in sub menu.
b. LCD : Select when used LCD monitor. Adjust details in sub menu.
4-3. LENS SHADING : Compensates brightness of four lens’ corners.
a. LEVEL (0~60) : Adjust level
b. H-CENTER (0~255) : Adjust right and left
c. V-CENTER (0~255) : Adjust up and down.
4-4. DEFECT : Correct the defective pixel automatically when sense up
function is enable.
a.
SENSE UP (X4~X128) : When defect is on, adjust the ratio of Sense up.
b. DIFF (0~3) : When defect is on, adjust the size of Defect pixel.
c. THRESHOLD (OFF/LOW/MID/HIGH) : When defect is on, Adjust AGC
level.
d. START : Active the defect function
5. COMM ADJ : A function of related RS-485 correspondence
5-1. CAM TITLE (ON/OFF) : The ID can be displayed on screen.
5-2. PROTOCOL : RS-485 Protocol set as default, PELCO-D.
5-3. RS485 : Adjust Camera ID, ID Display, baud rate. (2,400~57,600bps)
6. SYNC (INT) : Internal Sync. type, Use DC12V.
7. LANGUAGE: Select the language.
(English, Korean, Japanese, Chinese1, Chinese2, P, Français, Español,
Italiano,Português, Dutch, German, Polish, Turkish, Hebrew, Arab)
8. EXIT
SAVE : Save & Exit
RESET : Set as a default.
CANCEL : No Save & Exit
