Huvema VBS-2012H-CE, Operator'S Manual

Page: 14 / 33

- 13 -
Select saw blade in comply with the thickness of materials. Following suggestion might be helpful
to you:
A. Select a larger pitch blade for a thicker material.
B. Select a smaller pitch blade for a thicker material.
C. Use a smaller pitch blade to obtain a smooth cutting surface.
D. Use a larger pitch blade to obtain a faster cutting speed.
E. It is important to prepare different blades for different works.
To prevent saw blade from being blunt in no time, please notice the following points.
A. Set the speed faster.
B. Adjust the feeding rate to ensure the cutting is continuously.
The sawing surface quality is affected by the blade sharpness.
A. Use a smaller pitch blade.
B. Increase blade speed slightly.
C. Decrease feeding rate.
D. Use a better blade.
Following are suggestions for preventing saw blade from being twisted.
A. Put the blade correctly in the center of the upper guides and lower guides.
B. Decrease feeding rate.
C. Use a larger pitch blade.
D. Set the guides post as close to the work as possible.
To prevent from any vibration when cutting, please notice to the following instructions.
A. Check the blade if it is welded straight.
B. Adjust blade speed according to the thickness and material of the work.
C. Increase the feeding rate.
D. Increase blade tension.
E. Use a smaller pitch blade.
▲
PLEASE NOTE THAT A CORRECT SELECTION OF SAW BLADE IS VERY IMPORTANT
TO BANDSAW OPERATING. ALWAYS SELECT A BLADE ACCORDING TO THE
MATERIAL AND THICKNESS OF THE WORK.