TL - 500 - AA
11
LUBRICATION CHART
LUBRICATION POINTS
TYPE OF GREASE/ OIL
INTERVAL
Slide guides
OIL SAE 30
WEEKLY
Rotary disc nº 16 Fig (8.4)
OIL SAE 30
WEEKLY
Bearings nº 14 Fig (8.5)
BEARINGS GREASE
YEARLY
Feeder rods movement
OIL SAE 30
WEEKLY
- Recommendations of the manufacturer.
Clean the machine periodically, and especially the feeder. It is the only way to ensure a
proper operation of the machine .
Before carrying out any intervention on the electric equipment, disconnect the feeding
plug.
When using extension cords, make sure that the used cable is from the appropriate
section ( 4 x 1´5 ).
Whenever you need to change any parts, use original ones and try to use the oil
recommended by the manufacturer.
In the event of questions or any doubts, do not hesitate to consult the
manufacturer
Summary of Contents for TL-500-AA
Page 1: ...Aluminium saw TL 500 AA...
Page 12: ...TL 500 AA 12 8 0 PNEUMATIC DIAGRAM...
